Cleaning grout in the bathroom is a delicate job. When it comes to cleaning them, we cannot just scrub it hard and hope to remove the stains. This could do more harm than good. Therefore, for you to do it properly, this article will show you easy ways of cleaning grout in the bathroom.
First of all, here is a list of the materials that you will need:
- Soft brush
- Large sponge
- Baking soda
- Soft cloth
- Non-corrosive cleaning product with foaming tip
Notice!
The use of hard chemicals such as vinegar, bleach or ammonia may damage your tiles and grout. Therefore, make sure to use non-corrosive products before cleaning grout in the bathroom.
Moreover, it is essential to use a soft brush and not a hard bristle one. If you attend to use a steel brush, for example, you may remove the grout and scratch the tiles around all together.
Throughout the entire process, make sure to rinse your brush regularly. If you don’t, you may put dirt into your grout while you clean it. As it is porous material, it soaks up whatever is left on the surface. You don’t want it to end up dirtier than before.
Cleaning the grout
Step 1
Fristly, wipe the surface from any residual elements like dust, toothpaste, etc. Then, pre-wet the surface before you start cleaning it. Be aware that if you have not cleaned your grout for a long time, you can use baking soda before applying the cleaning product. Sprinkle the grout with it to create a paste that adheres to the surface.
Step 2
Now you apply the cleaner using the foaming tip and spray thoroughly along the lines. Give it some time to penetrate. When it is really dirty, leave it for approximately a minute.
Step 3
Now that everything is ready, you can start scrubbing with a soft brush. Unlike the hard one, the soft brush reaches into the tiny pores and removes the dirt and grime without any damaging. A gentle scrubbing should do enough. However, if some of the stains remain, you can use a little more elbow grease.
Note: do not forget to rinse the brush in between, as if you don’t it will redistribute the dirt after each scrub.
Step 4
Finally, use a sponge to wipe up the mess. Again, just like with the brush, rinse the sponge often to prevent the dirt from spreading around. Now check how your grout looks. If you are not satisfied, repeat the cleaning process. If everything seems good to you, dry the surface with a piece of cloth.
As you see, cleaning grout in the bathroom is very simple! We hope it helped you! Let us know in the comments if you have tips for us or another technique!
